(L x W x H mm)
|Beta 62||110v or 230v AC||6volt 2Amp||150 x 90 x 125||3||8 - 16A/h|
|Beta 122||110v or 230v AC||12volt 2Amp||150 x 90 x 125||3||8 - 16A/h|
|Beta 124||110v or 230v AC||12volt 4Amp||150 x 90 x 125||3||16 - 32A/h|
|Beta 241||110v or 230v AC||24volt 1Amp||150 x 90 x 125||3||8 - 16A/h|
|Beta 242||110v or 230v AC||24volt 2Amp||150 x 90 x 125||3||8 - 16A/h|
These units can also be set for float/standby charging only.
The low voltage start and 3 charging stages, including proportional timing, make these units good at recovering batteries which have been misused orneglected during use.
These chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
With the CE mark and EEC approvals these chargers are “quality in a box”.
- 6V, 12V or 24V output voltages
- 110V or 240V input voltages
- 1A up to 4A output current
- Output connector options
- 3 stage charging
- Proportional timing
- 3 LED status indication
- Reverse polarity protection
- Short circuit protection
- Independent overrun timer
- Soft start current control
Not sure which charger you need?
If you aren’t sure which charger you need please do not hesitate to contact us for technical assistance. Alternatively please take a photo of your battery and / or current charger and email firstname.lastname@example.org and we will be able to advise the suitable charger for your application.